{Official} Engineering Services Exam Syllabus – ELECTRONICS AND TELECOMMUNICATION ENGINEERING Paper 1 + Paper 2 – IES/ESE 2020

0 Shares

Engineering Services Exam 2020 (IES/ESE 2020) Syllabus

Engineering Services Exam 2020 exam syllabus for IES Electronics And Telecommunication Engineering (EC) 2020 is released by UPSC at upsc.gov.in , direct link to download the ESE 2020 Electronics And Telecommunication Engineering (EC) 2020 is provided in this article.

ESE 2020 PRELIMINARY+MAINS (ELECTRONICS AND TELECOMMUNICATION ENGINEERING) – Paper Pattern

As per the latest notification released by UPSC total 3 stages will be there in Engineering Services Exam 2020 i.e Preliminary (Pre), Mains and Personality Test.

Stages Examination Marks
Stage-I Preliminary Exam (Objective) 0500
Stage-II Mains Exam (Conventional) 0600
Stage-III Personality Test 0200
Stage-I + Stage-II + Stage-III Grand Total 1300

Preliminary/Stage-I Examination IES – General Studies And Engineering Aptitude Exam

Before IES Electronics And Communication Engineering Objective Exam there will be a exam of 200 marks on the same day of General Studies And Engineering Aptitude. This exam will be of 200 marks and this is the compulsory exam and will be common to all branch. ESE GS and EA is the non technical paper exam in engineering services exam introduced from IES 2020. For More Details : Click Here

Preliminary/Stage-I Examination (Electronics And Communication Engineering Objective Type Papers) :

Electronics And Communication Engineering Preliminary Engineering Discipline paper will be of 3 hours with 300 maximim marks. It will be objective paper. It will be made by combining Electronics And Communication Engineering Paper 1 and Electronics And Communication Engineering Paper 2 Syllabus mentioned below.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2020 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.

Mains/Stage-II Examination (Electronics And Communication Engineering Conventional Type Papers) :

Electronics And Communication Engineering Mains Engineering Discipline paper will be of 600 marks. Electronics And TeleCommunication Engineering Conventional Paper 1 – 300 Marks and 3 Hours time limit and Electronics And TeleCommunication Engineering Conventional Paper 2 – 300 Marks and 3 Hours time limit. It will be Conventional (Theory+Numerical+Derivation) paper.
Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2020 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.
 

ESE Electronics And Communication Engineering Examination Paper 1 Syllabus :

The questions from the following Topics will be set in Paper 1

1. Basic Electronics Engineering:
Basics of semiconductors; Diode/Transistor basics and characteristics; Diodes for different uses; Junction & Field Effect Transistors (BJTs, JFETs, MOSFETs); Transistor amplifiers of different types, oscillators and other circuits; Basics of Integrated Circuits (ICs); Bipolar, MOS and CMOS ICs; Basics of linear ICs, operational amplifiers and their applications-linear/non-linear; Optical sources/detectors; Basics of Opto electronics and its applications.
2. Basic Electrical Engineering:
DC circuits-Ohm’s & Kirchoff’s laws, mesh and nodal analysis, circuit theorems; Electro-magnetism, Faraday’s & Lenz’s laws, induced EMF and its uses; Single-phase AC circuits; Transformers, efficiency; Basics- DC machines, induction machines, and synchronous machines; Electrical power sources- basics: hydroelectric, thermal, nuclear, wind, solar; Basics of batteries and their uses.
3. Materials Science:
Electrical Engineering materials; Crystal structure & defects; Ceramic materials-structures, composites, processing and uses; Insulating laminates for electronics, structures, properties and uses; Magnetic materials, basics, classification, ferrites, ferro/para-magnetic materials and components; Nano materials-basics, preparation, purification, sintering, nano particles and uses; Nano-optical/magnetic/electronic materials and uses; Superconductivity, uses.
4. Electronic Measurements and Instrumentation:

Principles of measurement, accuracy, precision and standards; Analog and Digital systems for measurement, measuring instruments for different applications; Static/dynamic characteristics of measurement systems, errors, statistical analysis and curve fitting; Measurement systems for non-electrical quantities; Basics of telemetry; Different types of transducers and displays; Data acquisition system basics.
5. Network Theory:
Network graphs & matrices; Wye-Delta transformation; Linear constant coefficient differential equations- time domain analysis of RLC circuits; Solution of network equations using Laplace transforms- frequency domain analysis of RLC circuits; 2-port network parameters-driving point & transfer functions; State equations for networks; Steady state sinusoidal analysis.
6. Analog and Digital Circuits:
Small signal equivalent circuits of diodes, BJTS and FETs; Diode circuits for different uses; Biasing & stability of BJT & JFET amplifier circuits; Analysis/design of amplifier- single/multi-stage; Feedback& uses; Active filters, timers, multipliers, wave shaping, A/D-D/A converters; Boolean Algebra& uses; Logic gates, Digital IC families, Combinatorial/sequential circuits; Basics of multiplexers, counters/registers/ memories /microprocessors, design& applications. 

Students have to first clear preliminary stage I then only they will be able to go to Stage II i.e  Engineering Services Exam 2020 Mains Stage (Conventional Paper), and after clearing Preliminary Stage I and Stage II Mains (Conventional Paper) , final merit will be made and students will be called for Stage III i.e Personality Test.

 

ESE Electronics And Communication Engineering Examination Paper 2 Syllabus :

The questions from the following Topics will be set in Paper-2

1. Analog and Digital Communication Systems:
Random signals, noise, probability theory, information theory; Analog versus digital communication & applications: Systems- AM, FM, transmitters/receivers, theory/practice/ standards, SNR comparison; Digital communication basics: Sampling, quantizing, coding, PCM, DPCM, multiplexing-audio/video; Digital modulation: ASK, FSK, PSK;
Multiple access: TDMA, FDMA, CDMA; Optical communication: fibre optics, theory, practice/standards.
2. Control Systems:
Classification of signals and systems; Application of signal and system theory; System realization; Transforms& their applications; Signal flow graphs, Routh-Hurwitz criteria, root loci, Nyquist/Bode plots; Feedback systems-open &close loop types, stability analysis, steady state, transient and frequency response analysis; Design of control systems, compensators, elements of lead/lag compensation, PID and industrial controllers.
3. Computer Organization and Architecture:
Basic architecture, CPU, I/O organisation, memory organisation, peripheral devices, trends; Hardware /software issues; Data representation& Programming; Operating systems-basics, processes, characteristics, applications; Memory management, virtual memory, file systems, protection & security; Data bases, different types, characteristics and design; Transactions and concurrency control; Elements of programming languages, typical examples.
4. Electro Magnetics:
Elements of vector calculus, Maxwell’s equations-basic concepts; Gauss’, Stokes’ theorems; Wave propagation through different media; Transmission Lines-different types, basics, Smith’s chart, impedance matching/transformation, S-parameters, pulse excitation, uses; Waveguides-basics, rectangular types, modes, cut-off frequency, dispersion, dielectric types; Antennas-radiation pattern, monopoles/dipoles, gain, arrays-active/passive, theory, uses.
5. Advanced Electronics Topics:
VLSI technology: Processing, lithography, interconnects, packaging, testing; VLSI design: Principles, MUX/ROM/PLA-based design, Moore & Mealy circuit design; Pipeline concepts & functions; Design for testability, examples; DSP: Discrete time signals/systems, uses; Digital filters: FIR/IIR types, design, speech/audio/radar signal processing uses; Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing; Controllers & uses; Embedded systems.
6. Advanced Communication Topics:
Communication networks: Principles /practices /technologies /uses /OSI model/security; Basic packet multiplexed streams/scheduling; Cellular networks, types, analysis, protocols (TCP/TCPIP); Microwave & satellite communication: Terrestrial/space type LOS systems, block schematics link calculations, system design; Communication satellites, orbits, characteristics, systems, uses; Fibre-optic communication systems, block schematics, link calculations, system design.

0 Shares

Review {Official} Engineering Services Exam Syllabus – ELECTRONICS AND TELECOMMUNICATION ENGINEERING Paper 1 + Paper 2 – IES/ESE 2020.

Your email address will not be published. Required fields are marked *